Mosaic Digital Illumination Systems
Hardware Specifications
The angular alignment of either the CW laser or lamp illumination is factory set. The spatial alignment is controlled via the software calibration routine. The focus in the z-direction is fixed at installation or OEM integration. Beam shaping is then controlled with the spatial light modulating DMD device.
Model
The Mosaic Digital Illumination Systems is available optimized for a factory set magnification.
| Model |
7200 |
7201 |
7202 |
7203 |
7204 |
7205 |
| Magnification |
0.75 |
0.88 |
1.00 |
1.13 |
1.33 |
1.00 |
Illumination Source Options
| High pressure mercury lamp |
100W to 300W (maximum) |
| CW laser |
405nm diode |
| 488nm Argon |
| 514nm Argon |
| Other on request |
Optical
| Transmission |
360nm to 700nm |
| Intensity stability |
absolute |
| Extinction ratio |
> 1000:1 |
| Minimum resolvable spot |
diffraction limited with 100x objective |
| Optical pixel rise/fall time |
< 1microsec |
| Minimum optical pulsewidth |
75 microsecond external trigger |
| 100 microsecond internal trigger |
| Maximum frame repition rate |
600 frames / sec |
Mechanical / Electrical
| Illumination port clear aperture |
Ø34mm |
| Illumination port filter size |
Ø38mm |
| Dimensions |
12.5" (l) x 8.0" (w) x 4.5" (h) |
| Power |
90-240VAC 50-60 Hz .25A max 25W |
| Weight |
8 pounds |
Illumination Port Options
| Dichroic beamspliter |
Single pass, specify wavelength |
| Multi pass, specify wavelength |
| Beamsplitter |
450nm to 750nm, R = 100, 70, 50 or 30% |
| Excitation filter |
480nm / 20nm (GFP) |
| 470nm / 40nm (FITC) |
| 535nm / 40nm (Rhodamine) |
| Other on request |
| Laser safety filter, interloks |
Laser specific |
| Shutter |
Optional |
Adapters
Flange adapters are available to retrofit to the epi-port or video port of commercially available microscopes.
| Adapter |
Part No. |
| Leica DMI series |
7310-DMI |
| Nikon TE2000 |
7310-N2000 |
| Nikon Ti series |
7310-Nti |
| Olympus IX series |
7310-IX70 |
| Zeiss Axiovert 200 |
7310-ZV200 |
| Zeiss Axio Imager |
not required |
| Zeiss Axio Observer |
7310-ZV200 |
| C-mount video port |
not required |
|
|
INTEROPERABILITY
- Compatible with microscopes platforms
- Point & slit scan confocal
- Spinning disk confocal
- Wide field
- Custom OEM systems available for High Content Screening and other fluorescence based bioimaging instrumentation
- Compatible with control and acquisition software from market leading microscope manufacturers including Carl Zeiss, Leica, Nikon and Olympus
- Drivers available for market leading bioimaging software including MetaMorph®, Volocity® and SlideBook™
- Wavelength modularity - add lasers and filters cost effectively
 
|